Bullet Resistant Panels
Most customers mistakenly believe that Bullet Resistant wall armor is called Kevlar. In
fact customers often refer to Bullet Resistant fiberglass panels as bullet board, wall armor, safe room material, Kevlar panels, bulletproof wall panels, or just bulletproof materials.
Bullet resistant Fiberglass is the best choice for wall armor. It’s a fraction of the cost of Kevlar panels or any other bullet resistant materials for walls and is the most commonly used product in the bulletproof industry to protect any surface that is not a window. It’s the foundational building material for the Bulletproof industry.
Common uses for Bullet resistant wall armor / bullet resistant fiberglass panels are the following:
We offer 2 choices for bullet resistant protection, Maxguard Silver and MaxGuard Gold. Both offer superior quality bullet resistant protection. So if you desire the best wall armor protection, Maxguard is the choice.
MaxGuard Silver is the standard for bullet resistance. It is available in U.L. levels 1 through 8 , and possesses the following features:
• It is lighter than comparable products such as steel.
• Easily processed for custom applications (sizing etc.)
• Less expensive to install.
If you are looking for a bullet resistant Panel to provide any type of wall protection or to protect a counter or judges bench or to protect a school or classroom wall, chances are you are looking for Bullet resistant fiberglass panels. This is the choice of the Financial institutions, Government, Military, High level Corporate Security and the wall armor material used for commercial and residential safe rooms.
Architects routinely specify Maxguard for ballistic protection in public areas such as courtrooms and banks.
Product Specification Table
|Product||UL-752 Performance Level Standard||NIJ 0108.01 Performance Level Standard||
|MX-G1||Level 1||9mm||124 gr lead||FMJ||1175 ft./sec.||1/4"|
|MX-G2||Level 2||.357 mag||158 gr lead||JSP||1250 ft./sec.||11/32"|
|Type IIA||.357 mag||158 gr lead||JSP||1250 ft./sec.||11/32"|
|9mm||124 gr lead||FMJ||1090 ft./sec.||11/32"|
|MX-G3||Level 3||.44 mag||240 gr lead||SWC/GC||1350 ft./sec.||7/16"|
|Type II||.357 mag||158 gr lead||JSP||1395 ft./sec.||7/16"|
|9mm||124 gr lead||FMJ||1175 ft./sec.||7/16"|
|Type IIIA||.44 mag||240 gr lead||SWC/GC||1400 ft./sec.||7/16"|
|9mm||124 gr lead||FMJ||1400 ft./sec.||7/16"|
|MX-G4||Level 4||.30 cal||180 gr lead||LSP||2450 ft./sec.||1-3/16"|
|MX-G5||Level 5||Type III||7.62mm||150 gr lead||FMJ||2750 ft./sec.||1-3/16"|
|MX-G8||Level 8||Type III||7.62mm||150 gr lead||FMJ||2750 ft./sec||1-3/8"|
FMJ = full metal jacket; GC = gas-checked; JSP = jacketed soft point; LSP = lead soft point; SWC = semi-wadcutter
Bullet Resistant Specifications
LEED Point Qualified Product
- Class 1-A fire/smoke-rated Bullet Resistant Fiberglass Panels
Maxguard Gold is one of the only commercially available Class 1-A fire-rated Bullet resistant materials that meets both Bullet Resistant and Fire Resistant Standards. MaxGuard is being used in commercial, government, School structures, Hospitals, wherever ballistic protection is desired, while complying with numerous federal and state flame and smoke protection regulations. MaxGuard provides greater security and protection in walls, doors, counters, or other applications, as compared to polyester-based ballistic laminates. The difference is that MaxGuard Gold will not burn and does not produce toxic smoke when exposed to the threat of fire. As we are aware, fire is normally present in large scale violent events, so it’s imperative to choose a bullet resistant product that is safe in the event of a fire.
LEED (Leadership in Energy and Environmental Design) is an internationally recognized green building certification system, providing third-party verification that a building or community was designed and built using strategies aimed at improving performance across all the metrics that matter most: energy savings, water efficiency, CO2 emissions reduction, improved indoor environmental quality, and stewardship of resources and sensitivity to their impacts.
Developed by the U.S. Green Building Council (USGBC), LEED provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions.
LEED is flexible enough to apply to all building types – commercial as well as residential. It works throughout the building lifecycle – design and construction, operations and maintenance, tenant fitout, and significant retrofit. And LEED for Neighborhood Development extends the benefits of LEED beyond the building footprint into the neighborhood it serves.
LEED provides a point system to score green building design and construction. The system is categorized in five basic areas: Sustainable Sites, Water Efficiency, Energy and Atmosphere, Materials and Resources, and Indoor Environmental Quality. Buildings are awarded points based on the extent various sustainable strategies are achieved.
Please fill out the form below to receive a quote on Bullet Resistant Fiberglass
Customized Judges Benches
Burn test: Maxguard Gold Phenolic Resin Fiberglass did not combust. Only minor carbon scoring is visible.
Burn test: Unlike Maxguard Gold Phenolic resin fiberglass, the more common polyester fiberglass does burn, as well as produce noxious smoke.
VIDEO: Burn Test MaxGuard Phenolic Fiberglass
VIDEO: Burn Test Polyester Fiberglass
VIDEO: Maxguard Gold fiberglass being shot with 9mm rounds. Note: none of the bullets went through.
Safe rooms can quickly be installed with simple tools or we can arrange for installation to be completed for you. If you are looking for the best Safe Room at an affordable price, Please call us for a free estimate and to learn about our new (patent pending) safe room technology. Safe rooms consist of Modular Safe Room Panels that carry a bullet resistant rating from U.L. Level 1 thru U.L. Level 8 along with a zero fire / zero smoke rating. This is extremely important when choosing any safe room. Most of our competitor’s safe room materials will burn or produce a toxic smoke when exposed to fire. This is not acceptable when protection is the goal of the product at hand.
Safe Room Doors
In addition to custom safe rooms and safe room kits, we also offer a variety of safe room doors, ranging from steel to custom wood doors. These doors come in U.L. rated levels 1 - 8, and can even be camoflaged into existing walls and shelves.
Standard Steel Door
Custom Wood Doors
Custom Hidden Doors
Modular saferoom kits available
220 Newport Coast Dr #11-591 Newport Beach Ca. 92660
If you are looking for Bullet proof panels or wall armor panels please call us now so we can help you, (800) 432-3079. We stock bullet resistant panels and can normally ship them within one or two business days. We also can custom engineer and fabricate to custom sizes to save you the labor and money it would cost for you to fabricate in the field.
NOW YOU HAVE A CHOICE WITH MAXGUARD GOLD
MaxGuard Gold offers the same great bullet resistand protection as MaxGuard Silver, with the added benefits of flame resistance and qualification for LEED points.
Maxguard Gold is the brand of choice when Bullet Resistant Wall Armor is needed. Maxguard Gold is the only choice when it comes to Safe Rooms, Military, or high level corporate security wall armor. The reason is that Maxguard Gold is not only a bulletproof panel used for bullet resistant protection for walls, it is also Fire Rated to the highest level and produces no toxic smoke in the event of a fire. It is also a green product and it qualifies for LEED points.
You can purchase it now by calling MaxGuard:
to speak with a customer service specialist to answer your technical questions, and assist you with your order.